this is the flash image
Sales 0118 929 6811
Services 0118 966 9124

Hofmann Wheel Alignment

Geoliner 780 Geoliner 482 Dynaliner 3500
Geoliner 680 Geoliner 480 (cordless) Dynaliner 3000
Geoliner 670 Geoliner 480 Caster, Camber, SAI Gauge
Geoliner 482R Geoliner 460 Alignment Lifts

BACK TO THE TOP

Geoliner 780 (inc clamps) - Part No. 6027817

 

 

 

Computerised four-wheel aligners for cars,with 3D technology under Windows®

Technical features

  • Ideal drive-through solution
  • Three self-calibrating IVS cameras
  • Windows® operating system
  • Automatic height indexing of IVS cameras
  • 32 Bit professional software with enhanced features and more convenient operation
  • No lifting of vehicle for wheel alignment necessary
  • No cables between targets and camera system
  • Very short set-up time
  • Alignment in 4 operating steps only
  • No electronics required on the vehicle
  • No rim run-out compensation needed
  • Camber and toe measurement via roll-back of vehicl by approx. 20 cm
  • Measurement of caster, SAI, toe-out on turns and maximum steering angle
    in a single operation
  • Toe-out on turns and maximum steering angle up to approx. 60°
  • Hard disc drive for direct inputs
  • Hard disc drive for direct inputs
  • Customer database
  • Vehicle specs database with animated graphics
  • Customised program sequence
  • Simultaneous reading of thrust line, toe-out on turns, SAI, caster, camber and toe on the monitor
  • Simultaneous reading of measured data and vehicle specs
  • No repetition of caster measurement needed after adjustment
  • Compatible to ASA network
  • CE - conform

Standard equipment

  • Self-calibrating 3D digital cameras, synchronised camera lifting system
  • PC complete with Geo Pro 32 Bit Premium software, vehicle specs, hard disc drive, DVD and floppy drive
  • 19” monitor
  • Windows® operating system, mouse/pad
  • Keyboard
  • Connecting lead cabinet / PC
  • Infrared remote control
  • Speaker assembly
  • Wheel clamps 10-22” w/ targets, front, 1 each for RH & LH side
  • Wheel clamps 10-22” w/ targets, rear, 1 each for RH & LH side
  • Mechanical wheel chock unit
  • Connecting lead camera system - cabinet
  • A4 colour printer complete w/ data and power cord
  • Steering wheel holder
  • Brake pedal depressor
  • 2 Levelling pads for turntables
  • Operating instruction
  • Cabinet

Optional extras

  • VoiceAlign™ voice-controlled alignment
  • 2 Mechanical turntables (front)
  • 3-point wheel clamps for alloy wheels, including targets

For the vehicle database integrated into geoliner 770 Hofmann does not take over any warranty for discrepancies whatsoever from car makers specs.

Included Accessories

  • 28115 Pedal depressor assy
  • 4029107 Wheel clamp kit front
  • 4029109 Wheel clamp kit rear

BACK TO THE TOP

Geoliner 680 w/ Camera lift (inc clamps) - Part No. 6027540

 

 

 

Technical features

Wheel aligners for cars with 3D Technology under Windows® operating system

  • Software with enhanced features and more convenient operation
  • Voice-controlled wheel alignment with optional VoiceAlign kit
  • Compatible to 14 different car-specific databases with setting aids for more than 5000 models each – available as optional extra
  • Customer database
  • One-man operator guidance
  • No wheel lifting for alignment and alignment in 4 operating steps only
  • No cables between targets and camera system
  • Direct input of vehicle specs for special cars is possible
  • Simultaneous reading of thrust line, toe-out on turns, S.A.I., caster, camber and toe on the monitor
  • Measurement of toe-out on turns and max. steering angle up to approx. 60
  • A4 colour printer
  • Power supply 230 V, 50/60 Hz

Standard equipment

  • Movable camera beam support (lift)
  • 1 PC with Geo Pro 32 Bit Premium software, vehicle specs, HDD, CD / DVD drive, floppy drive
  • 3.5”, optical mouse, USB 2.0 interface, network card
  • Operating system and keyboard
  • 19” Monitor
  • 1 Remote control unit
  • 1 Speaker assembly
  • 4 Targets (2 x front end, 2 x rear end)
  • 1 Mechanical wheel chock unit
  • 1 Camera beam left/right with CCD camera system
  • 1 A4 colour printer with data lead
  • 1 Steering wheel holder
  • 1 Brake pedal depressor
  • 1 Deluxe mobile cabinet

For the vehicle specs integrated into geoliner 680 Hofmann does not take over any warranty for discrepancies whatsoever from car makers specs.

Included Accessories

  • 28115 Pedal depressor assy
  • 4029004 Camera lift
  • 4029107 Wheel clamp kit front
  • 4029109 Wheel clamp kit rear

BACK TO THE TOP

Geoliner 670 w/ Camera lift (inc clamps) - Part No. 6027282

 

 
   

 

Technical features

Wheel aligners for cars with 3D Technology under Windows® operating system

  • Software with enhanced features and more convenient operation
  • Voice-controlled wheel alignment with optional VoiceAlign kit
  • Compatible to 14 different car-specific databases with setting aids for more than 5000 models each – available as optional extra
  • Customer database
  • One-man operator guidance
  • No wheel lifting for alignment and alignment in 4 operating steps only
  • No cables between targets and camera system
  • Direct input of vehicle specs for special cars is possible
  • Simultaneous reading of thrust line, toe-out on turns, S.A.I., caster, camber and toe on the monitor
  • Measurement of toe-out on turns and max. steering angle up to approx. 60
  • A4 colour printer
  • Power supply 230 V, 50/60 Hz

Standard equipment

  • Movable camera beam support (lift)
  • 1 PC with Geo Pro 32 Bit non-premium software, vehicle specs, HDD, CD / DVD drive, floppy drive 3.5”, optical mouse, USB 2.0 interface, network card
  • Operating system and keyboard
  • 17” Monitor
  • 1 Remote control unit
  • 1 Speaker assembly
  • 4 Targets (2 x front end, 2 x rear end)
  • 1 Mechanical wheel chock unit
  • 1 Camera beam left/right with CCD camera system
  • 1 A4 colour printer with data lead
  • 1 Steering wheel holder
  • 1 Brake pedal depressor
  • 1 Mobile cabinet

For the vehicle specs integrated into geoliner 670 Hofmann does not take over any warranty for discrepancies whatsoever from car makers specs.

Included Accessories

  • 28115 Pedal depressor assy
  • 4029004 Camera lift
  • 4029107 Wheel clamp kit front
  • 4029109 Wheel clamp kit rear

BACK TO THE TOP

Geoliner 482R Cordless (inc clamps) - Part No. 6027409

Premium 8-sensor aligner with CCD technology

 

 

 

Technical features

Computerised four-wheel aligners for cars, with 8-sensor CCD technology under Windows®

  • Windows® operating system
  • 32 Bit Professional software with enhanced features and more convenient operation
  • With VoiceAlignTM voice-controlled wheel alignment for the S models
  • With NetSpecsTM car specification up-date via internet
  • 8-sensor CCD camera technique
  • Vehicle database
  • Setting aids with animated graphics
  • Customer database
  • One-man operator guidance
  • Hard disc drive for direct inputs
  • Measurement and alignment of cradle
  • Simultaneous reading of caster, camber and toe on the monitor
  • Measurement of toe-out on turns and max. steering angle with mechanical, or electronic turntables(optional)
  • Ink-jet colour printer A4
  • Power supply 230 V, 50/60 Hz
  • Compatible to ASA network
  • CE - conform

Standard equipment

  • 1 Premium personal computer with Geo Pro 32 Bit premium software, vehicle database, HDD,
  • DVD, floppy drive 3.5", sound card, modem, network adaptor, power cord
  • USB serial box
  • 1 Remote control unit
  • 4 Self-centring 3-point alloy wheel clamps 10-22" with double hooks
  • 4 Cordless CCD wheel units (2 left, 2 right)
  • 1 Ink-jet colour printer A4 with data lead and power cord
  • 1 Steering wheel holder
  • 1 Brake pedal depressor
  • 1 Power cord
  • 1 Operator manual/spare parts list
  • 1 Mobile de luxe cabinet, large
  • 1 19" monitor with data lead and power cord
  • 1 Windows 98® operating system, mouse/pad
  • 1 Keyboard with cover and decals

For the vehicle database integrated into geoliner 482 Hofmann does not take over any warranty for discrepancies whatsoever from car makers specs.

Included Accessories

  • 28115 Pedal depressor assy
  • 4027753 Standard clamps 8-sensor CCD ;(Set = 2 pcs): Range 10"-22"
  • 4027753 Standard clamps 8-sensor CCD ;(Set = 2 pcs): Range 10"-22"

BACK TO THE TOP

Geoliner 482  (inc clamps) - Part No. 6027408

Premium 8-sensor aligner with CCD technology

 

 

 

Technical features

Computerised four-wheel aligners for cars, with 8-sensor CCD technology under Windows®

  • Windows® operating system
  • 32 Bit Professional software with enhanced features and more convenient operation
  • With VoiceAlignTM voice-controlled wheel alignment for the S models
  • With NetSpecsTM car specification up-date via internet
  • 8-sensor CCD camera technique
  • Vehicle database
  • Setting aids with animated graphics
  • Customer database
  • One-man operator guidance
  • Hard disc drive for direct inputs
  • Measurement and alignment of cradle
  • Simultaneous reading of caster, camber and toe on the monitor
  • Measurement of toe-out on turns and max. steering angle with mechanical, or electronic turntables(optional)
  • Ink-jet colour printer A4
  • Power supply 230 V, 50/60 Hz
  • Compatible to ASA network
  • CE - conform

Standard equipment

  • 1 Premium personal computer with Geo Pro 32 Bit premium software, vehicle database, HDD,
  • DVD, floppy drive 3.5", sound card, modem, network adaptor, power cord
  • USB serial box
  • 1 Remote control unit
  • 4 Self-centring 3-point alloy wheel clamps 10-22" with double hooks
  • 4 CCD wheel units (2 left, 2 right)
  • 4 Data leads
  • 1 Ink-jet colour printer A4 with data lead and power cord
  • 1 Steering wheel holder
  • 1 Brake pedal depressor
  • 1 Power cord
  • 1 Operator manual/spare parts list
  • 1 Mobile de luxe cabinet, large
  • 1 19" monitor with data lead and power cord
  • 1 Windows 98® operating system, mouse/pad
  • 1 Keyboard with cover and decals

For the vehicle database integrated into geoliner 482 Hofmann does not take over any warranty for discrepancies whatsoever from car makers specs.

Included Accessories

  • 28115 Pedal depressor assy
  • 4027753 Standard clamps 8-sensor CCD ;(Set = 2 pcs): Range 10"-22"
  • 4027753 Standard clamps 8-sensor CCD ;(Set = 2 pcs): Range 10"-22"

BACK TO THE TOP

Geoliner 480 Cordless (inc clamps) - Part No. 6027378

Entry level 8-sensor corded aligner with CCD technology

 

 

 

Technical features

Computerised four-wheel aligners for cars, with 8-sensor CCD technology under Windows®

  • Windows® operating system
  • 32 Bit Professional software with enhanced features and more convenient operation
  • 8-sensor CCD camera technique
  • Vehicle database
  • Setting aids with animated graphics
  • Customer database
  • One-man operator guidance
  • Hard disc drive for direct inputs
  • Measurement and alignment of cradle
  • Simultaneous reading of caster, camber and toe on the monitor
  • Measurement of toe-out on turns and max. steering angle with mechanical, or electronic turntables(optional)
  • Ink-jet colour printer A4
  • Power supply 230 V, 50/60 Hz
  • Compatible to ASA network
  • CE - conform

Standard equipment

  • 1 Standard personal computer with Geo Pro 32 Bit standard software, vehicle database, HDD,
  • CD ROM, floppy drive 3.5", sound card, network adaptor, power cord
  • USB serial box
  • 1 Remote control unit
  • 4 Self-centring 3-point alloy wheel clamps 10-22" with double hooks
  • 4 Cordless CCD wheel units (2 left, 2 right)
  • 1 Ink-jet colour printer A4 with data lead and power cord
  • 1 Steering wheel holder
  • 1 Brake pedal depressor
  • 1 Power cord
  • 1 Operator manual/spare parts list
  • 1 Standard cabinet, closed, with shelves
  • 1 17" monitor with data lead and power cord
  • 1 Windows 98® operating system, mouse/pad
  • 1 Keyboard with cover and decals

For the vehicle database integrated into geoliner 480 Hofmann does not take over any warranty for discrepancies whatsoever from car makers specs.

Included Accessories

  • 28115 Pedal depressor assy
  • 4027753 Standard clamps 8-sensor CCD ;(Set = 2 pcs): Range 10"-22"
  • 4027753 Standard clamps 8-sensor CCD ;(Set = 2 pcs): Range 10"-22"

BACK TO THE TOP

Geoliner 480 (inc clamps) - Part No. 6027353

Entry level 8-sensor corded aligner with CCD technology

 

 

 

Technical features

Computerised four-wheel aligners for cars, with 8-sensor CCD technology under Windows®

  • Windows® operating system
  • 32 Bit Professional software with enhanced features and more convenient operation
  • 8-sensor CCD camera technique
  • Vehicle database
  • Setting aids with animated graphics
  • Customer database
  • One-man operator guidance
  • Hard disc drive for direct inputs
  • Measurement and alignment of cradle
  • Simultaneous reading of caster, camber and toe on the monitor
  • Measurement of toe-out on turns and max. steering angle with mechanical, or electronic turntables(optional)
  • Ink-jet colour printer A4
  • Power supply 230 V, 50/60 Hz
  • Compatible to ASA network
  • CE - conform

Standard equipment

  • 1 Standard personal computer with Geo Pro 32 Bit standard software, vehicle database, HDD,
  • CD ROM, floppy drive 3.5", sound card, network adaptor, power cord
  • USB serial box
  • 1 Remote control unit
  • 4 Self-centring 3-point alloy wheel clamps 10-22" with double hooks
  • 4 CCD wheel units (2 left, 2 right)
  • 4 Data leads
  • 1 Ink-jet colour printer A4 with data lead and power cord
  • 1 Steering wheel holder
  • 1 Brake pedal depressor
  • 1 Power cord
  • 1 Operator manual/spare parts list
  • 1 Standard cabinet, closed, with shelves
  • 1 17" monitor with data lead and power cord
  • 1 Windows 98® operating system, mouse/pad
  • 1 Keyboard with cover and decals

For the vehicle database integrated into geoliner 480 Hofmann does not take over any warranty for discrepancies whatsoever from car makers specs.

Included Accessories

  • 28115 Pedal depressor assy
  • 4027753 Standard clamps 8-sensor CCD ;(Set = 2 pcs): Range 10"-22"
  • 4027753 Standard clamps 8-sensor CCD ;(Set = 2 pcs): Range 10"-22"

BACK TO THE TOP

Geoliner 460 (inc clamps) - Part No. 6027363

Entry level 6-sensor corded aligner with CCD technology

 

 

 

Technical features

Four-wheel aligner for cars with 6-sensor CCD technology under Windows®

  • Windows® operating system
  • 32 Bit professional software with enhanced fatures and more convenient operation
  • With NetSpecsTM car specification up-date via internet
  • Compatible with ASA Network
  • Vehicle database
  • Setting aids with animated graphics
  • One-man operator guidance
  • Hard disc drive for direct inputs
  • Simultaneous reading of caster, camber and toe on the monitor
  • Measurement of toe-out on turns, S.A.I. and caster with mechanical turntables
  • Colour printer A4
  • Power supply 230 V, 50/60 Hz
  • CE - conform

Standard equipment

  • 1 Personal computer (Dell) with Geo Pro 32 Bit standard software, vehicle database, HDD, DVD drive, floppy drive 3.5", sound card, network adaptor, power cord
  • USB serial box
  • 1 Remote control unit
  • 4 3-point alloy wheel clamps 10-21" with double hooks
  • 4 CCD wheel units (2 front, 2 rear)
  • 4 Data leads
  • 1 Colour printer A4 with data lead and power cord
  • 1 Steering wheel holder
  • 1 Brake pedal depressor
  • 1 Power cord
  • 1 Operator manual/spare parts list
  • 1 Standard mobile cabinet
  • 1 15" monitor
  • Operating system with license and keyboard kit

For the vehicle database integrated into geoliner 460 wheel aligners Hofmann does not take over any warranty for discrepancies whatsoever from car makers specifications.

Included Accessories

  • 28115 Pedal depressor assy
  • 4027752 Standard clamps 6-sensor CCD ;(Set = 2 pcs); Range 10"-16"
  • 4027752 Standard clamps 6-sensor CCD ;(Set = 2 pcs); Range 10"-16"

BACK TO THE TOP

Dynaliner 3500 - trolley - Part No. DYN3500

Optical four-wheel alignment system with storage trolley and integral illuminated light box

 

3500  

 

Measures the following road angles:

  • Individual toe
  • Toe change
  • Set back
  • Thrustline
  • Steering wheel position
  • Suitable for pit, lift of floor use
  • Re-chargeable batteries for cable less operation
  • Simple hang-on mounting system
  • Suitable for 10 to 17.5 inch wheels
  • Supplied with storage trolley & integral illuminated light box to aid sales
  • Installation not included – Supplied with Training CD

Included Accessories

  • Turning discs
  • Steering wheel holder
  • Brake pedal depressor
  • Drop arm extensions

BACK TO THE TOP

Dynaliner 3000 - wall mounted - Part No. DYN3000

Optical four-wheel alignment system with wall mounted storage cabinet

 

 

 

Measures the following road angles:

  • Individual toe
  • Toe change
  • Set back
  • Thrustline
  • Steering wheel position
  • Suitable for pit, lift of floor use
  • Re-chargeable batteries for cable less operation
  • Simple hang-on mounting system
  • Suitable for 10 to 17.5 inch wheels
  • Supplied with wall cabinet
  • Installation not included – Supplied with Training CD

Included Accessories

  • Turning discs
  • Steering wheel holder
  • Brake pedal depressor
  • Drop arm extensions

 

BACK TO THE TOP

Caster, Camber & SAI Gauge - Part No. CC1000

Upgrades the above optical aligner models

   

 

Measures the following road angles:

  • Caster
  • Camber
  • King pin inclination

Included Accessories

  • Alignment specifications book

BACK TO THE TOP

Alignment Lifts

A range of alignment lifts are available to suit your needs

 

 

 

Alignment Lifts can be supplied with all Hofmann aligners. Plesae contact our sales office for advice and further information: sales-soeuk@snapon.com or 0118 969 6811