this is the flash image
Sales 0118 929 6811
Services 0118 966 9124

Hofmann Tyre Changers

Monty 3550 Monty 2300 1ph Monty 4400
Monty 3300 Racing 3ph Monty 1270 1ph Monty 3850
Monty 3300 Racing 1ph Easymount Pro 2 (tilt) Monty 3650
Monty 3300 1ph Monty 4400R  

BACK TO THE TOP

Monty 3550 3ph - Part No. 6027713

Racing type tilt back post tire changer for car and light truck wheels with 12-26 rims

 

Monty 3500 Technical Details
Rim clamping capacity  
   Outside: 12 - 26 inch
   Inside:   14 - 28 inch
Maximum rim width: 16" (406mm)
Maximum wheel diameter: 47" (1200 mm)
Maximum wheel width: 17" (440mm)
Double speed turntable: 7-14 rpm
Round turntable- lathe finish: 0.56" (14.4 mm)
Clamping cylinders d. 75mm (2.95").
Tower size: 120x120mm (4.72"x4.72").
Hex shaft: 41mm (1.61").
Bead breaker range: 60 - 305mm /
150 - 675mm
Space requirement: W:1350 mm
D:1650 mm
Weight: 320Kg
Compressed air supply: 8 - 10 bar
Power supply: 3 Ph AC 380 - 415 V / 50 Hz
Chuck speed rpm 7/14 RPM

 

Features

  • Clamping capability from the outside up to 26" (up to 30" with optional jaws)
  • Double acting bead breaking cylinder
  • Over-size bead breaking blade
  • Bead breaker adjustable in 2 positions
  • Bead breaker with robust, antiskid contact pad
  • Pedal-operated chuck with two speeds
  • Mounting head vertically and laterally adjustable in spaced-apart position relative to the rim (pneumatic)
  • Mounting head with a plastic protection in the nose
  • Pneumatically controlled movement of mounting head towards rim flange
  • Horizontal arm guided on rollers
  • Pedal-controlled tyre inflator
  • Quick-inflating valve
  • Tool box with 4 compartments and integrated precision gauge
  • Ergonomic and optimum position of pedals relative to the operator.
  • Including tyre lever WAVE and various plastic protections

Including pneumatic bead assist easymont pro and consequently best suited for handling run flat tyre systems (additional optional adaptors are required to handle PAX and CSR systems).

Included Accessories

  • 1419 Brush, for tire lubrication
  • 4014528 Assembly bottle + swab, for US models
  • 1418 Standard tire lever, 500 mm / 19.7" long
  • 25946 WAVE tire lever, specially shaped lever, especially for hard
    tire beads
  • 4027645 Light alloy rim protector for centre type sliding jaws (24"),
    set of 4
  • 4028228 Quick exchange device
  • 4016079 Set of 4 plastic protectors + 1 steel roller for
    mount/demount head
  • 14523 Manometer, for tire inflation, Psi scale

BACK TO THE TOP

Monty 3300 Racing 3ph - Part No. 6027459

Automatic tilt back post tire changer for car and light truck wheels with 10-24 rims

 

Monty 3300 Racing 3ph Technical Details
Rim clamping capacity  
   Outside: 10 - 24 inch
   Inside:
   (with adjustable jaws) 		 12 - 24 inch
Maximum rim width: 14" (355mm)
Maximum wheel diameter: 1000mm (39")
Maximum wheel width: 15" (381mm)
Round turntable- lathe finish: 0.47" (12 mm)
Clamping cylinders d. 75mm (2.95").
Turntable height from the floor (60mm less than the standard): 660mm (26")
Tower size: 120x120mm (4.72"x4.72").
Hex shaft: 38mm (1.49")
Bead breaker range: 40 - 340 /
140 - 440mm
Machine dimensions: H: 1950 mm
W: 1350 mm
D: 1700 mm
Weight: 230Kg
Compressed air supply: 8 - 15 bar
Power supply: 3Ph AC
380 - 415V / 50Hz
Chuck speed rpm 7/14 RPM

 

Features

  • Self-centring four-jaw chuck with chamfered jaws
  • No presetting required
  • Quick and safe clamping of car and light-truck wheels
  • Pneumatic bead breaker
  • Double-acting bead breaker with quick inflating valve for quick and safe inflation of tyres in line with CE standards
  • Servicing unit (pressure-relief valve/oiler)
  • CW & CCW rotation via electric motor
  • Mounting head adjustable without contact to the rim
  • Optional clamping jaws for motorcycle wheels
  • Machine post hinged to the rear and to the front upon pedal operation (pneumatic)
  • Mounting arm guided horizontally via roller
  • Chuck to be set to 2 speeds (7 and 14 rpm) via pedal
  • Bead breaker adjustable in two positions
  • Pneumatic tool lock and pneumatic tool approach
  • Pedal-controlled tyre inflating system via air ports in the clamping jaws
  • Pressure gauge fitted on separate post
  • Bead breaker blade supported in 3 joints
  • WAVE tyre lever
  • Plastic rim protection kit
  • CE - conform

Including pneumatic bead assist easymont pro and consequently best suited for handling run flat tyre systems (additional optional adaptors are required to handle PAX and CSR systems).

Included Accessories

  • 1419 Brush, for tire lubrication
  • 4003062 Set of 4 Allen wrenches, for maintenance, ;3 / 4 / 5 / 6 mm
  • 1418 Standard tire lever, 500 mm / 19.7" long
  • 25946 WAVE tire lever, specially shaped lever, especially for hard
    tire beads
  • 4026853 Plastic insert rim protectors, clip-on type, to protect rim
    from scratches, set of 3
  • 4027645 Light alloy rim protector for centre type sliding jaws (24"),
    set of 4
  • 4016079 Set of 4 plastic protectors + 1 steel roller for
    mount/demount head
  • 23484 Manometer, for tire inflation, Bar/Psi scale, CE approved

BACK TO THE TOP

Monty 3300 Racing 1ph - Part No. 6027793

Automatic tilt back post tire changer for car and light truck wheels with 10-24 rims

 

Monty 3300 Racing 1ph Technical Details
Rim clamping capacity  
   Outside: 10 - 24 inch
   Inside:
   (with adjustable jaws) 		 12 - 24 inch
Maximum rim width: 14" (355mm)
Maximum wheel diameter: 1000mm (39")
Maximum wheel width: 15" (381mm)
Round turntable- lathe finish: 0.47" (12 mm)
Clamping cylinders d. 75mm (2.95").
Turntable height from the floor (60mm less than the standard): 660mm (26")
Tower size: 120x120mm (4.72"x4.72").
Hex shaft: 38mm (1.49")
Bead breaker range: 40 - 340 /
140 - 440mm
Machine dimensions: H: 1950 mm
W: 1350 mm
D: 1700 mm
Weight: 230Kg
Compressed air supply: 8 - 15 bar
Power supply: 3Ph AC
380 - 415V / 50Hz
Chuck speed rpm 7.25 inch

 

Features

  • Self-centring four-jaw chuck with chamfered jaws
  • No presetting required
  • Quick and safe clamping of car and light-truck wheels
  • Pneumatic bead breaker
  • Double-acting bead breaker with quick inflating valve for quick and safe inflation of tyres in line with CE standards
  • Servicing unit (pressure-relief valve/oiler)
  • CW & CCW rotation via electric motor
  • Mounting head adjustable without contact to the rim
  • Optional clamping jaws for motorcycle wheels
  • Machine post hinged to the rear and to the front upon pedal operation (pneumatic)
  • Mounting arm guided horizontally via roller
  • Chuck to be set to 2 speeds (7 and 14 rpm) via pedal
  • Bead breaker adjustable in two positions
  • Pneumatic tool lock and pneumatic tool approach
  • Pedal-controlled tyre inflating system via air ports in the clamping jaws
  • Pressure gauge fitted on separate post
  • Bead breaker blade supported in 3 joints
  • WAVE tyre lever
  • Plastic rim protection kit
  • CE - conform

Including pneumatic bead assist easymont pro and consequently best suited for handling run flat tyre systems (additional optional adaptors are required to handle PAX and CSR systems).

Included Accessories

  • 1419 Brush, for tire lubrication
  • 4003062 Set of 4 Allen wrenches, for maintenance, ;3 / 4 / 5 / 6 mm
  • 25946 WAVE tire lever, specially shaped lever, especially for hard
    tire beads
  • 4026853 Plastic insert rim protectors, clip-on type, to protect rim
    from scratches, set of 3
  • 4027645 Light alloy rim protector for centre type sliding jaws (24"),
    set of 4
  • 4016079 Set of 4 plastic protectors + 1 steel roller for
    mount/demount head
  • 23484 Manometer, for tire inflation, Bar/Psi scale, CE approved

BACK TO THE TOP

Monty 3300 1ph - Part No. 6027784

Automatic tilt back post tire changer for car and light truck wheels with 10-22 rims

 

Monty 3300 1ph Technical Details
Rim clamping capacity  
   Outside: 10 - 20 inch
   Inside:
   (with adjustable jaws) 		 12 - 22 inch
Maximum rim width: 13" (300mm)
Round turntable- lathe finish: 0.47" (12 mm)
Clamping cylinders d. 75mm (2.95").
Turntable height from the floor (60mm less than the standard): 660mm (26")
Tower size: 120x120mm (4.72"x4.72").
Hex shaft: 38mm (1.49")
Bead breaker range: 40 - 340 mm
Machine dimensions: H: 1850 mm
W: 1160 mm
D: 1700 mm
Weight: 220Kg
Compressed air supply: 8 - 10 bar
Power supply: 3Ph AC
380 - 415V / 50Hz

 

Features

Tilt back post tyre changer with pneumatically tilted post
Scope of application: service stations and garages with medium tyre service volume

  • Double-acting bead breaker cylinder
  • Mounting head vertically and laterally adjustable in spaced-apart position relative to the rim
  • Pneumatically controlled movement of mounting head towards the rim
  • Self-centring four-jaw chuck
  • Mounting tool with a plastic protection
  • Ergonomic and user-friendly arrangement of pedals
  • Quick-inflating valve
  • Outer clamping range up to 20"
  • Pedal-controlled tilt back post, pneumatically forward
  • Post pneumatically locked in working position
  • With optional easymont pro suited for handling run-flat tyre systems (additional optional adaptors required for PAX and CSR)

Included Accessories

  • 1419 Brush, for tire lubrication
  • 4003062 Set of 4 Allen wrenches, for maintenance, ;3 / 4 / 5 / 6 mm
  • 1418 Standard tire lever, 500 mm / 19.7" long
  • 4026853 Plastic insert rim protectors, clip-on type, to protect rim from scratches, set of 3
  • 4027870 Light alloy rim protector, for centre jaws;1set = 4 off
  • 4016079 Set of 4 plastic protectors + 1 steel roller for mount/demount head
  • 23745 Hand gauge, for tire inflation, double scale Bar/Psi, 63 mm, CE approved

BACK TO THE TOP

Monty 2300 1ph - Part No. 6027783

Semi-automatic tilt back post tire changer for car and light truck wheels with 10-22 rims

 

Monty 2300 1ph Technical Details
Rim clamping capacity  
   Outside: 10 - 20 inch
   Inside:
   (with adjustable jaws) 		 12 - 22 inch
Maximum rim width: 13" (300mm)
Round turntable- lathe finish: 0.47" (12 mm)
Clamping cylinders d. 75mm (2.95").
Turntable height from the floor (60mm less than the standard): 660mm (26")
Tower size: 120x120mm (4.72"x4.72").
Hex shaft: 38mm (1.49")
Bead breaker range: 40 - 340 mm
Machine dimensions: H: 1850 mm
W: 1160 mm
D: 1700 mm
Weight: 220Kg
Compressed air supply: 8 - 10 bar
Power supply: 3Ph AC
380 - 415V / 50Hz

 

Features

  • Semi automatic heavy duty tilt back tyre changer for workshops and tyre bays
  • Self-centring four-jaw chuck with chamfered jaws
  • No presetting required
  • Quick and safe clamping of car and light-truck wheels
  • Pneumatic bead breaker
  • Double-acting bead breaker
  • With manual tyre inflator & tyre lever
  • With quick inflating valve for quick and safe inflation of tyres in line with CE standards
  • Servicing unit (pressure-relief valve/oiler)
  • CW & CCW rotation via electric motor
  • Mounting head adjustable without contact to the rim
  • Optional clamping jaws for motorcycle wheels
  • Machine post hinged to the rear upon pedal operation (mechanical)
  • Machine post locked in working position
  • Double-acting bead breaking cylinder
  • Pneumatic tool lock
  • Plastic rim protection kit
  • CE – conform

Included Accessories

  • 1419 Brush, for tire lubrication
  • 4003062 Set of 4 Allen wrenches, for maintenance, ;3 / 4 / 5 / 6 mm
  • 1418 Standard tire lever, 500 mm / 19.7" long
  • 4026853 Plastic insert rim protectors, clip-on type, to protect rim from scratches, set of 3
  • 4027870 Light alloy rim protector, for centre jaws;1set = 4 off
  • 4016079 Set of 4 plastic protectors + 1 steel roller for mount/demount head
  • 23745 Hand gauge, for tire inflation, double scale Bar/Psi, 63 mm, CE approved

BACK TO THE TOP

Monty 1270 1ph - Part No. 6027782

Swing arm tire changer for car and light truck wheels with 10-22 rims

 

Monty 1270 1ph Technical Details
Rim clamping capacity  
   Outside: 10 - 20 inch
   Inside:
   (with adjustable jaws) 		 12 - 22 inch
Maximum rim width: 13" (300mm)
Maximum wheel width: 14" (355mm)
Round turntable- lathe finish: 0.47" (12 mm)
Clamping cylinders d. 75mm (2.95").
Tower size: 120x120mm (4.72"x4.72").
Hex shaft: 38mm (1.49")
Bead breaker range: 70 - 330 mm
Machine dimensions: H: 1900 mm
W: 1070 mm
D: 1150 mm
Weight: 173Kg
Compressed air supply: 8 - 10 bar
Power supply: 1Ph AC
240V 50Hz

 

Features

  • Semi automatic entry level swing arm changer for workshops and garages
  • Self-centring four-jaw chuck with chamfered jaws
  • No presetting required
  • Quick and safe clamping of car and light-truck wheels
  • Pneumatic bead breaker
  • Double-acting bead breaker
  • With manual tyre inflator & tyre lever
  • With quick inflating valve for quick and safe inflation of tyres in line with CE standards
  • Servicing unit (pressure-relief valve/oiler)
  • CW & CCW rotation via electric motor
  • Mounting head adjustable without contact to the rim
  • Optional clamping jaws for motorcycle wheels
  • Mounting arm, laterally hinged
  • Mechanical tool lock
  • Plastic cap for the nose of the mounting head
  • CE - conform

Included Accessories

  • 1419 Brush, for tire lubrication
  • 4003062 Set of 4 Allen wrenches, for maintenance, ;3 / 4 / 5 / 6 mm
  • 1418 Standard tire lever, 500 mm / 19.7" long
  • 4016079 Set of 4 plastic protectors + 1 steel roller for mount/demount head
  • 23745 Hand gauge, for tire inflation, double scale Bar/Psi, 63 mm, CE approved

BACK TO THE TOP

Easymount Pro 2 (tilt back models) - Part No. EAA0329G35A

Third arm helper device for tilt back tyre changers

 

Easymount Pro 2 Technical Details
Compressed air supply: 8 - 10 bar

 

Features

The easymont-pro2 eases the fitting of "difficult" tyres and, with other accessories, enables the mounting/demounting of "run-flat" tyres

  • Ideal aid for tyre changing, especially with wide tyres having stiff sidewalls, and indispensable for run-flat tyre system such as PAX, CSR, RFT, eufori@,EMT, DSST, SSR and ZeroP (some may require additional accessories)
  • Integrated pneumatic bead hold-down device, turning 360° with the wheel
  • Pneumatically operated roller, directly on the mounting head

 

BACK TO THE TOP

Monty 4400R - Part No. 6027221

Heavy duty truck tire changer for truck, tractor and OTR wheels with 14-56 rim diameter.

 

Technical Details
Rim centring capacity min  
   Min: 14" (355mm)
   Max:  44" (1118mm)
Max. wheel diameter 2300mm
(90 1/2")
Maximum wheel width over: 1400mm (55")
Max. torque: 3100 Nm
(2268 ftxlbs)
Bead-breaker force: 33kN
(7260lbs)
Chuck speed: 4 / 8
Rating of chuck motor: 1,5 / 2,2kW
Rating of hydraulic motor: 1,5kW
Max. wheel weight: 1500kg
Machine dimensions: H: 1600 mm
W: 2880 mm
D: 2100 mm
Weight: 1035Kg
Power supply: 400 VAC 3 ph 50 - 60 Hz

 

Features

Tyre changer for truck, bus, agricultural and earthmover tyres
Universal tyre changers for drop centre and split ring rims, for quick changing of truck and bus tyres

  • Quick and safe clamping of wheels via self-centring chuck
  • Careful tyre changing of tubed and tubeless tyres
  • CW and CCW rotation
  • Mobile control unit
    - hydraulically controlled lifting and lowering of the mounting arm
    - hydraulically controlled rotation of the mounting tool
    - hydraulically controlled carriage transfer using 12 A
  • CE - conform

Included Accessories

  • 1418 Standard tire lever, 500 mm / 19.7" long
  • 4002354 Bead pushing lever. ;To hold bead in the drop centre of the rim during the mounting operation
  • 4004461 Long tire lever
  • 4009472 Mounting clamp, to help in mounting operations

BACK TO THE TOP

Monty 4400 - Part No. 6027220

Heavy duty truck tire changer for truck, tractor and OTR wheels with 14-56 rim diameter.

 

Technical Details
Rim centring capacity min  
   Min: 14" (355mm)
   Max:  44" (1118mm)
   Max (with opt. extension): 56" (1423mm)
Max. wheel diameter 2300mm
(90 1/2")
Maximum wheel width over: 1400mm (55")
Max. torque: 3100 Nm
(2268 ftxlbs)
Bead-breaker force: 33kN
(7260lbs)
Chuck speed: 4 / 8
Rating of chuck motor: 1,5 / 2,2kW
Rating of hydraulic motor: 1,5kW
Max. wheel weight: 1500kg
Machine dimensions: H: 1600 mm
W: 2980 mm
D: 2065 mm
Weight: 1035Kg
Power supply: 400 VAC 3 ph 50 - 60 Hz

 

Features

Tyre changer for truck, bus, agricultural and earthmover tyres
Universal tyre changers for drop centre and split ring rims, for quick changing of truck and bus tyres

  • Quick and safe clamping of wheels via self-centring chuck
  • Careful tyre changing of tubed and tubeless tyres
  • CW and CCW rotation
  • Mobile control unit
  • For truck, bus, commercial vehicle and earthmover wheels up to 1500 kg
  • 2 Chuck speeds
  • Fusing 9.5 A
  • CE - conform

Included Accessories

  • 1418 Standard tire lever, 500 mm / 19.7" long
  • 4002354 Bead pushing lever. ;To hold bead in the drop centre of the rim during the mounting operation
  • 4004461 Long tire lever
  • 4009472 Mounting clamp, to help in mounting operations

BACK TO THE TOP

Monty 3850 - Part No. 6027219

Truck tire changer for tubeless and tube-type wheels with 14-26 rim diameter.

 

Technical Details
Rim centring capacity min  
   Min: 14" (355mm)
   Max:  26" (660mm)
Max. wheel diameter 1500mm (59")
Maximum wheel width over: 700mm (27.5")
Max. torque: 1800 Nm
(1320 ftxlbs)
Bead-breaker force: 27kN
(5940lbs)
Drive motor rating: 1,80kW
Rating of hydraulic motor: 1,80kW
Max. wheel weight: 1500kg
Space requirements: H: 1200 mm
W: 2200 mm
D: 1660 mm
Weight: 1035Kg
Power supply: 400 VAC 3 ph 50 - 60 Hz

 

Features

Tyre changer for truck, bus and agricultural tyres
Universal tyre changers for drop centre and split ring rims, for quick changing of truck and bus tyres

  • Quick and safe clamping of wheels via self-centring chuck
  • Careful tyre changing of tubed and tubeless tyres
  • CW and CCW rotation
  • Mobile control unit
  • CE - conform

Included Accessories

  • 4004461 Long tire lever
  • 4009472 Mounting clamp, to help in mounting operations
  • 4014914 Adaptor 22.5" alloy rims, (single) ; 4 off

BACK TO THE TOP

Monty 3650 - Part No. 6027218

Truck tire changer for tubeless and tube-type wheels with 14-26 rim diameter.

 

Technical Details
Rim centring capacity min  
   Min: 14" (355mm)
   Max:  22.5" (562mm)
Max. wheel diameter 1200mm
(47")
Maximum wheel width over: 500mm (19.5")
Max. torque: 1800 Nm
(1320 ftxlbs)
Bead-breaker force: 33kN
(7260lbs)
Drive motor rating: 0.75kW
Rating of hydraulic motor: 0.75kW
Space requirements: H: 1100 mm
W: 1290 mm
D: 1370 mm
Weight: 330kg
Power supply: 400 VAC 3 ph 50 - 60 Hz

 

Features

Tyre changer for truck, bus, agricultural and earthmover tyres
Universal tyre changers for drop centre and split ring rims, for quick changing of truck
and bus tyres

  • Quick and safe clamping of wheels via self-centring chuck
  • Careful tyre changing of tubed and tubeless tyres
  • CW and CCW rotation
  • Mobile control unit
    - hydraulically controlled lifting and lowering of the mounting arm
    - hydraulically controlled rotation of the mounting tool
    - hydraulically controlled carriage transfer using 12 A
  • CE - conform

Included Accessories

  • 1418 Standard tire lever, 500 mm / 19.7" long
  • 4002354 Bead pushing lever. ;To hold bead in the drop centre of the rim during the mounting operation
  • 4004461 Long tire lever
  • 4009472 Mounting clamp, to help in mounting operations