Hofmann Wheel Balancers

Geodyna Optima - Part No. 6027518 + EAK0257G07A

Ride diagnosis wheel balancer

Technical Details Centre bore diameter: 43 - 115 mm Shaft diameter: 40 mm Measuring speed: 200 rpm Rim width: 3 - 20 inch Rim diameter: 8 - 30 inch Max. wheel width: 530 mm Max. wheel diameter: 950 mm Max. wheel weight: 70Kg Dimensions with wheel hood open: H:1700 mm W:1390 mm D:1150 mm Weight: 164Kg Power supply: 200-240 V single ph 50/60 Hz, or 115-120 V single ph 50/60 Hz with optional step-up transformer

Features

• Fully automatic wheel balancer with 3D laser-technology
• Balancer with full wheel guard Flat screen
• ART wheel weight removing tool
• Accessory holder on left machine side
• Non contact data entry of all wheel data
• Non contact measurement of lateral and radial run-out
• Automatic selection of wheel weight placement mode
• Wheel weight location for stick-on weights (ALU program) taken from internal data base
• Relocation of correction position via geodata measuring system with AutoStopSystem or via laser pointer in 5 o’clock position
• Patented adhesive wheel weight clamp for geodata
• Automatic counting of spokes and location of spoke positions for Behind-the-Spoke- Placement mode (HSP) through non contact devices
• Electro-mechanical POWER CLAMP device for quick, convenient and safe clamping and mid-centring of wheels
• Automatic detection if a complete wheel assembly or only a rim is attached to the balancer and start of the relevant balancing procedure
• VPM – Virtual plane measurement
• Automatic orientation into correction planes
• Automatic braking after measuring run
• Balancing of car and light-truck wheels
• Main shaft lock
• Flat screen
• Compatible with asa network
• Cones 42–77 mm, 72–99 mm, 96–116 mm diameter
• Spacer ring, clamping sleeve, clamping head

Included Accessories

• 25539 Centring cone Ø 96–116 mm
  F or rims with centre bore of Ø 97–115 mm.
• 25518 Centring cone Ø 72–99 mm
  F or rims with centre bore of Ø 73–98 mm.
• 25517 Centring cone, dia. 42-77 mm - for 40 mm shaft.
  For rims with centre bore of dia. 43–76 mm.

For further information on this unique balancer visit www.optima-balancer.com

* patented/patent pending

Geodyna 6800P - Part No. 6027693
Off-the-car CRT wheel balancer, motorized, for car and light-truck wheels

Technical Details Centre bore diameter: 43 - 115 mm Shaft diameter: 40 mm Measuring speed: 200 rpm Rim width: 1 - 20 inch Rim diameter: 8 - 24 inch Max. wheel width: 530 mm Max. wheel diameter: 950 mm Max. wheel weight: 70Kg Dimensions: H:1756 mm W:1280 mm D:1080 mm Weight: 164Kg Power supply: 200-240 V single ph 50/60 Hz, or 115-120 V single ph 50/60 Hz with optional step-up transformer

Features

• Fully computerised motorised balancer with VDU and Geodata system fitted with an electro-mechanical Powerclamp for faster, easier clamping of wheels
• Electro-mechanical “POWER CLAMP” device for quick, convenient and safe clamping and mid-centring of wheels
• 15” VGA standard colour monitor
  Rim disc light and mirror for quick and ergonomic operation ALU modes
• Including geopac 2 accessory kit, consisting of universal weight pliers and adhesive weight removing tool
• Geodata measuring system with automatic data transfer (3D SAPE) and positioning of adhesive wheel weights
• Adhesive wheel weight clamp
• AutoStopSystem for the geodata gauge arm when in exact correction position
• VPM – Virtual plane measurement
• Compatible with – geodyna 6800 / 6800p
• Automatic measurement of static and dynamic unbalance in a single measuring run
• Automatic orientation into correction planes
• Wheel modes: standard wheels, 15-deg taper, flat base and drop centre rims, special rotors, motorcycle wheels
• Balancing of car and light-truck wheels
• 6 Balancing modes (5 for alloy wheels)
• 9 User profiles
  Measuring time 3 seconds
• HOS – Hofmann optimisation mode
• Minimisation mode (matching)
• HSP – split weight mode
• PAX wheel program
  Main shaft lock
• Cones 42–77 mm, 72–99 mm, 96–116 mm diameter
• Spacer ring
• Accessories for balancing motorcycle wheels as optional extras
• Wheel guard for max wheel dia. of 950 mm; inside guard width 550 mm
• Max. wheel weight 70 kg

Included Accessories

• 25539 Centring cone Ø 96–116 mm
  For rims with centre bore of Ø 97–115 mm.
• 25518 Centring cone Ø 72–99 mm
  For rims with centre bore of Ø 73–98 mm.
• 25517 Centring cone, dia. 42-77 mm, for 40 mm shaft.
  For rims with centre bore of dia. 43 - 76 mm.

Geodyna 6800 - Part No. 6027692
Off-the-car CRT wheel balancer, motorized, for car and light-truck wheels

Technical Details Centre bore diameter: 43 - 115 mm Shaft diameter: 40 mm Measuring speed: 200 rpm Rim width: 1 - 20 inch Rim diameter: 8 - 24 inch Max. wheel width: 530 mm Max. wheel diameter: 950 mm Max. wheel weight: 70Kg Dimensions: H:1756 mm W:1280 mm D:1080 mm Weight: 152Kg Power supply: 200-240 V single ph 50/60 Hz, or 115-120 V single ph 50/60 Hz with optional step-up transformer

Features

• Fully computerised motorised balancer with VDU and Geodata system
• 15” VGA standard colour monitor
• Rim disc light and mirror for quick and ergonomic operation ALU modes
  Including geopac 2 accessory kit, consisting of universal weight pliers and adhesive weight removing tool
• geodata measuring system with automatic data transfer (3D SAPE) and positioning of adhesive wheel weights
• Adhesive wheel weight clamp
• AutoStopSystem for the geodata gauge arm when in exact correction position
• VPM – Virtual plane measurement
• Compatible with – geodyna 6800 / 6800p
• Automatic measurement of static and dynamic unbalance in a single measuring run
• Automatic orientation into correction planes
• Wheel modes: standard wheels, 15-deg taper, flat base and drop centre rims, special rotors, motorcycle wheels
• Balancing of car and light-truck wheels
• 6 Balancing modes (5 for alloy wheels)
• 9 User profiles
• Measuring time 3 seconds
• HOS – Hofmann optimisation mode
• Minimisation mode (matching)
• HSP – split weight mode
• PAX wheel program
• Main shaft lock
• MZV-4 cone adaptor with quick nut
• Cones 42–77 mm, 72–99 mm, 96–116 mm diameter
• Spacer ring
• Accessories for balancing motorcycle wheels as optional extras
• Wheel guard for max wheel dia. of 950 mm; inside guard width 550 mm
• Max. wheel weight 70 kg

Included Accessories

• 4028845 MZV-4 cone adaptor
  For tapered shafts, with spring-suspended inner cone,
  consisting of:
  1 x Tapered basic body with clamping flange and long
  adaptor sleeve
  1 x Plastic wing-type quick nut with clamping head
  1 x Spacer 20 mm long
  3 x Cones Ø 42–77 / 72–99 / 96–116 mm
  For steel and alloy rims with centre bore of Ø 43 – 115 mm,
  on the condition the centre bore inner side is machined
  sufficiently accurate.
• 25539 Centring cone Ø 96–116 mm
  For rims with centre bore of Ø 97–115 mm.
• 25518 Centring cone Ø 72–99 mm
  For rims with centre bore of Ø 73–98 mm.
• 25517 Centring cone, dia. 42-77 mm, for 40 mm shaft.
  For rims with centre bore of dia. 43 - 76 mm.

* Patent pending

** Patent granted

Geodyna 6300P - Part No. 6027691
Off-the-car high-digital wheel balancer, motorized, for car and light-truck wheels

Technical Details Centre bore diameter: 43 - 115 mm Shaft diameter: 40 mm Measuring speed: 200 rpm Rim width: 1 - 20 inch Rim diameter: 8 - 24 inch Max. wheel width: 530 mm Max. wheel diameter: 950 mm Max. wheel weight: 70Kg Input of distance Auto Input of diameter/width Auto Dimensions: H:1370 mm W:1280 mm D:1190 mm Weight: 152Kg Power supply: 200-240 V single ph 50/60 Hz, or 115-120 V single ph 50/60 Hz with optional step-up transformer

Features

• Fully computerised motorised balancer with Geodata system fitted with an electro-mechanical
• Powerclamp for faster, easier clamping of wheels
• Electro-mechanical “POWER CLAMP” device for quick, convenient and safe clamping and mid-centring of wheels
• Large screen-like LC display
• Rim disc light and mirror for quick and ergonomic operation in ALU modes
• Including geopac 2 accessory kit, consisting of universal weight pliers and adhesive weight removing tool
• Geodata measuring system with automatic data transfer (3D SAPE) and positioning of adhesive
• wheel weights
• Adhesive wheel weight clamp
• AutoStopSystem for the geodata gauge arm when in exact correction position
• VPM – Virtual plane measurement
• Automatic measurement of static and dynamic unbalance in a single measuring run
• Automatic orientation into correction planes
• Wheel modes: standard wheels, 15-deg taper, flat base and drop centre rims, special rotors, motorcycle wheels
• Balancing of car and light-truck wheels
• 6 Balancing modes (5 for alloy wheels)
• 9 User profiles
• Measuring time 3 seconds
• HOS – Hofmann optimisation mode
• Minimisation mode (matching)
• HSP – split weight mode
• PAX wheel program
• Main shaft lock
• Cones 42–77 mm, 72–99 mm, 96–116 mm diameter
• Spacer ring
• Accessories for balancing motorcycle wheels as optional extras
• Wheel guard for max wheel dia. of 950 mm; inside guard width 550 mm
• Max. wheel weight 70 kg

Included Accessories

• 25539 Centring cone Ø 96–116 mm
  For rims with centre bore of Ø 97–115 mm.
• 25518 Centring cone Ø 72–99 mm
  For rims with centre bore of Ø 73–98 mm.
• 25517 Centring cone, dia. 42-77 mm, for 40 mm shaft.
  For rims with centre bore of dia. 43 - 76 mm.

* Patent pending

** Patent granted

Geodyna 6300 - Part No. 6027690
Off-the-car high-digital wheel balancer, motorized, for car and light-truck wheels

Technical Details Centre bore diameter: 43 - 115 mm Shaft diameter: 40 mm Measuring speed: 200 rpm Rim width: 1 - 20 inch Rim diameter: 8 - 24 inch Max. wheel width: 530 mm Max. wheel diameter: 950 mm Max. wheel weight: 70Kg Input of distance Auto Input of diameter/width Auto Dimensions: H:1370 mm W:1280 mm D:1190 mm Weight: 140Kg Power supply: 200-240 V single ph 50/60 Hz, or 115-120 V single ph 50/60 Hz with optional step-up transformer

Features

• Fully computerised motorised balancer with Geodata system
• Large screen-like LC display
• Rim disc light and mirror for quick and ergonomic operation in ALU modes
• Including geopac 2 accessory kit, consisting of universal weight pliers and adhesive weight removing tool
• Geodata measuring system with automatic data transfer (3D SAPE) and positioning of adhesive wheel weights
• Adhesive wheel weight clamp
• AutoStopSystem for the geodata gauge arm when in exact correction position
• VPM – Virtual plane measurement
• Automatic measurement of static and dynamic unbalance in a single measuring run
• Automatic orientation into correction planes
• Wheel modes: standard wheels, 15-deg taper, flat base and drop centre rims, special rotors, motorcycle wheels
• Balancing of car and light-truck wheels
• 6 Balancing modes (5 for alloy wheels)
• 9 User profiles
• Measuring time 3 seconds
• HOS – Hofmann optimisation mode
• Minimisation mode (matching)
• HSP – split weight mode
• PAX wheel program
• Main shaft lock
• MZV-4 cone adaptor with quick nut
• Cones 42–77 mm, 72–99 mm, 96–116 mm diameter
• Spacer ring
• Accessories for balancing motorcycle wheels as optional extras
• Wheel guard for max wheel dia. of 950 mm; inside guard width 550 mm
• Max. wheel weight 70 kg

Included Accessories

• 4028845 MZV-4 cone adaptor
  For tapered shafts, with spring-suspended inner cone,
  consisting of:
  1 x Tapered basic body with clamping flange and long
  adaptor sleeve
  1 x Plastic wing-type quick nut with clamping head
  1 x Spacer 20 mm long
  3 x Cones Ø 42–77 / 72–99 / 96–116 mm
  For steel and alloy rims with centre bore of Ø 43 – 115 mm,
  on the condition the centre bore inner side is machined
  sufficiently accurate.
• 25539 Centring cone Ø 96–116 mm
  For rims with centre bore of Ø 97–115 mm.
• 25518 Centring cone Ø 72–99 mm
  For rims with centre bore of Ø 73–98 mm.
• 25517 Centring cone, dia. 42-77 mm, for 40 mm shaft.
  For rims with centre bore of dia. 43 - 76 mm.

* Patent pending

** Patent granted

Geodyna 4801 - Part No. 6027773
Off-the-car medium CRT wheel balancer, motorized, for car and light-truck wheels

Technical Details Centre bore diameter: 43 - 115 mm Shaft diameter: 40 mm Measuring speed: 200 rpm Rim width: 1 - 20 inch Rim diameter: 8 - 24 inch Max. wheel width: 530 mm Max. wheel diameter: 950 mm Max. wheel weight: 70Kg Input of rim width Manually Dimensions: H:1756 mm W:1280 mm D:1080 mm Weight: 122Kg Power supply: 200-240 V single ph 50/60 Hz, or 115-120 V single ph 50/60 Hz with optional step-up transformer

Features

• VPM – Virtual plane measurement
• Automatic measurement of static and dynamic unbalance in a single measuring run
• Wheel modes: standard wheels, 15-deg taper, flat base and drop centre rims, special rotors, motorcycle wheels
• Balancing of car and light-truck wheels
• 8 Balancing modes (7 for alloy wheels)
• Wheel weight fitting system
• Adhesive wheel weight clamp
• HOS – Hofmann optimisation mode
• Minimisation mode (matching)
• HSP – split weight mode
• PAX wheel program
• MZV-4 cone adaptor with quick nut
• Cone 42–77 mm diameter
• Cone 72–99 mm diameter
• Cone 96–116 mm diameter
• Spacer ring
• Accessories for balancing motorcycle wheels as optional extras
• Max. wheel weight 70 kg
• 15” VGA standard colour monitor
• 3D SAPE with automatic data transfer of distance rim/machine, rim diameter and rim width
• Automatic orientation into correction positions
• 9 User profiles
• Measuring time 3 seconds
  Incl. Main shaft lock
• Wheel guard for max wheel dia. of 950 mm; inside guard width 151mm
  Including geopac 2 accessory kit, consisting of universal weight pliers and adhesive weight removing tool
• Compatible with asa network

Included Accessories

• 4028845 MZV-4 cone adaptor
  For tapered shafts, with spring-suspended inner cone,
  consisting of:
  1 x Tapered basic body with clamping flange and long
  adaptor sleeve
  1 x Plastic wing-type quick nut with clamping head
  1 x Spacer 20 mm long
  3 x Cones Ø 42–77 / 72–99 / 96–116 mm
  For steel and alloy rims with centre bore of Ø 43 – 115 mm,
  on the condition the centre bore inner side is machined
  sufficiently accurate.
• 25539 Centring cone Ø 96–116 mm
  For rims with centre bore of Ø 97–115 mm.
• 25518 Centring cone Ø 72–99 mm
  For rims with centre bore of Ø 73–98 mm.
• 25517 Centring cone, dia. 42-77 mm, for 40 mm shaft.
  For rims with centre bore of dia. 43 - 76 mm.
• 6452 Universal weight pliers; to fit balance weights on the rim
  flange.

Geodyna 4300P - Part No. 6027966
Off-the-car medium digital wheel balancer, motorized, for car and light-truck wheels

Technical Details Centre bore diameter: 43 - 115 mm Shaft diameter: 40 mm Measuring speed: 200 rpm Rim width: 1 - 20 inch Rim diameter: 8 - 24 inch Max. wheel width: 950 mm Max. wheel weight: 70Kg Input of rim width: Manually Dimensions: H:1756 mm W:1280 mm D:1080 mm Weight: 105Kg Power supply: 200-240 V single ph 50/60 Hz, or 115-120 V single ph 50/60 Hz with optional step-up transformer

Features

• VPM – Virtual plane measurement
• Automatic measurement of static and dynamic unbalance in a single measuring run
• Wheel modes: standard wheels, 15-deg taper, flat base and drop centre rims, special rotors, motorcycle wheels
• Balancing of car and light-truck wheels
• 8 Balancing modes (7 for alloy wheels)
• Wheel weight fitting system
• Adhesive wheel weight clamp
• HOS – Hofmann optimisation mode
• Minimisation mode (matching)
• HSP – split weight mode
• PAX wheel program
• Cone 42–77 mm diameter
• Cone 72–99 mm diameter
• Cone 96–116 mm diameter
• Spacer ring
• Accessories for balancing motorcycle wheels as optional extras
• Max. wheel weight 70 kg
• Large screen-like LC display
• 2D SAPE with automatic data transfer of distance rim/machine and rim diameter
• Input of rim width via key operation and rotation of wheel
• 4 User profiles
• Measuring time 3 seconds
  Incl. main shaft lock
• Wheel guard for max wheel dia. of 950 mm; inside guard width 515 mm
• Electro-mechanical “POWER CLAMP” device for quick, convenient and safe clamping and mid-centring of wheels

Included Accessories

• 4028845 MZV-4 cone adaptor
  For tapered shafts, with spring-suspended inner cone,
  consisting of:
  1 x Tapered basic body with clamping flange and long
  adaptor sleeve
  1 x Plastic wing-type quick nut with clamping head
  1 x Spacer 20 mm long
  3 x Cones Ø 42–77 / 72–99 / 96–116 mm
  For steel and alloy rims with centre bore of Ø 43 – 115 mm,
  on the condition the centre bore inner side is machined
  sufficiently accurate.
• 25539 Centring cone Ø 96–116 mm
  For rims with centre bore of Ø 97–115 mm.
• 25518 Centring cone Ø 72–99 mm
  For rims with centre bore of Ø 73–98 mm.
• 25517 Centring cone, dia. 42-77 mm, for 40 mm shaft.
  For rims with centre bore of dia. 43 - 76 mm.

Geodyna 4300 - Part No. 6027689
Off-the-car medium digital wheel balancer, motorized, for car and light-truck wheels

Technical Details Centre bore diameter: 43 - 115 mm Shaft diameter: 40 mm Measuring speed: 200 rpm Rim width: 1 - 20 inch Rim diameter: 8 - 24 inch Max. wheel width: 950 mm Max. wheel weight: 70Kg Input of rim width: Manually Dimensions: H:1756 mm W:1280 mm D:1080 mm Weight: 105Kg Power supply: 200-240 V single ph 50/60 Hz, or 115-120 V single ph 50/60 Hz with optional step-up transformer

Features

• Fully computerised motorised balancer
• VPM – Virtual plane measurement
• Automatic measurement of static and dynamic unbalance in a single measuring run
• Wheel modes: standard wheels, 15-deg taper, flat base and drop centre rims, special rotors, motorcycle wheels
• Balancing of car and light-truck wheels
• 8 Balancing modes (7 for alloy wheels)
• Wheel weight fitting system
• Adhesive wheel weight clamp
• HOS – Hofmann optimisation mode
• Minimisation mode (matching)
• HSP – split weight mode
• PAX wheel program
• MZV-4 cone adaptor with quick nut
• Cone 42–77 mm diameter
• Cone 72–99 mm diameter
• Cone 96–116 mm diameter
• Spacer ring
• Accessories for balancing motorcycle wheels as optional extras
• Max. wheel weight 70 kg
• Large screen-like LC display
• 2D SAPE with automatic data transfer of distance rim/machine and rim diameter
• Input of rim width via key operation and rotation of wheel
• 4 User profiles
• Measuring time 3 seconds
  Incl. main shaft lock
• Wheel guard for max wheel dia. of 950 mm; inside guard width 515 mm

Included Accessories

• 4028845 MZV-4 cone adaptor
  For tapered shafts, with spring-suspended inner cone,
  consisting of:
  1 x Tapered basic body with clamping flange and long
  adaptor sleeve
  1 x Plastic wing-type quick nut with clamping head
  1 x Spacer 20 mm long
  3 x Cones Ø 42–77 / 72–99 / 96–116 mm
  For steel and alloy rims with centre bore of Ø 43 – 115 mm,
  on the condition the centre bore inner side is machined
  sufficiently accurate.
• 25539 Centring cone Ø 96–116 mm
  For rims with centre bore of Ø 97–115 mm.
• 25518 Centring cone Ø 72–99 mm
  For rims with centre bore of Ø 73–98 mm.
• 25517 Centring cone, dia. 42-77 mm, for 40 mm shaft.
  For rims with centre bore of dia. 43 - 76 mm.

* Patent pending

** Patent granted

Geodyna 985 - Part No. 6027761
Off-the-car basic digital wheel balancer, motorized, for car and light-truck
wheels

Technical Details Centre bore diameter: 43 - 116 mm Shaft diameter: 40 mm Measuring speed: <100 rpm Rim width: 1 - 20 inch Rim diameter: 8 - 25 inch Max. wheel width: 950 mm Max. wheel diameter without wheel guard 1117 mm Max. wheel diameter with optional wheel guard 950 mm Max. wheel weight: 70Kg Input of rim width: Manually Dimensions: H:968 mm W:903 mm D:577 mm Weight: 64Kg Power supply: 200-240 V single ph 50/60 Hz

Features

• Digital wheel balancer Scope of application: Small garages and service stations
• Motor-driven wheel balancer
• Patented virtual plane measurement technique (VPM)
• 1D SAPE – automatic input of distance
• Conspicuous LC display
• Gauge arm with patented wheel weight clamp
• Patented split weight mode (HSP)
• PAX mode
• QuickBAL for reduced cycle times
• Automatic braking after measurement
• Pedal-operated main shaft lock
• 4 user profiles
• Patented optimisation mode (HOS)

Included Accessories

• 4028845 MZV-4 cone adaptor
  For tapered shafts, with spring-suspended inner cone,
  consisting of:
  1 x Tapered basic body with clamping flange and long
  adaptor sleeve
  1 x Plastic wing-type quick nut with clamping head
  1 x Spacer 20 mm long
  3 x Cones Ø 42–77 / 72–99 / 96–116 mm
  For steel and alloy rims with centre bore of Ø 43 – 115 mm,
  on the condition the centre bore inner side is machined
  sufficiently accurate.
• 25539 Centring cone Ø 96–116 mm
  For rims with centre bore of Ø 97–115 mm.
• 25518 Centring cone Ø 72–99 mm
  For rims with centre bore of Ø 73–98 mm.
• 25517 Centring cone, dia. 42-77 mm, for 40 mm shaft.
  For rims with centre bore of dia. 43 - 76 mm.

Geodyna 4800L - Part No. 6027775
Off-the-vehicle CRT wheel balancer, motorized, for truck wheels

Technical Details Rim width setting ranger: 3 - 20 mm Rim diameter setting range: 8 - 30 mm Max. wheel width: 650 mm Max. wheel diameter: 1300 mm Max. wheel weight: 275Kg Dimensions: H:1300 mm W:2100 mm D:1330 mm Weight: 275Kg Power supply: 1/N/PE 200-240 V 50/60 Hz

Features

• 2D SAPE with automatic data transfer of distance rim/machine and rim diameter
• Input of rim width via key operation and rotation of wheel
• 15” VGA monitor
• Full wheel guard
• Measuring speed less than 100 rpm
• Accessory holder
• Permanent friction brake for convenient retaining of wheel during clamping and weight positioning
• VPM – Virtual plane measurement
• Weight box with 27 weight compartments and shelves for car cones and weight pliers
• Automatic braking of wheel after every measuring run
• Automatic measurement of static and dynamic unbalance in one measuring run
• Cycle time less than 18 s /22.5 x 10” wheel)
• Max. wheel weight 250 kg
• Truck wheel cone adaptor with wing nut, light-truck cone of 120–170 mm diameter and spacer
• Truck wheel cone adaptor with hidden spring so that only the cones for car wheels are required when car wheels are to be balance.

Geodyna 980L - Part No. 6027774
Off-the-vehicle digital wheel balancer, motorized, for truck wheels

Technical Details Rim width setting ranger: 3 - 20 mm Rim diameter setting range: 8 - 30 mm Max. wheel width: 650 mm Max. wheel diameter: 1300 mm Max. wheel weight: 250Kg Dimensions: H:1300 mm W:2100 mm D:1330 mm Weight: 275Kg Power supply: 1/N/PE 200-240 V 50/60 Hz

Features

• Truck and Light-Truck Wheel Balancer for Use with Forwarding Agents, Municipal Facilities and
• Tyre Shops.
• 2D SAPE with automatic data transfer of distance rim/machine and rim diameter
• Input of rim width via +/- keys
• Two LED panels
• Full wheel guard
• Measuring speed less than 100 rpm
• Accessory holder
• Permanent friction brake for convenient retaining of wheel during clamping and weight positioning
• VPM – Virtual plane measurement
• Weight box with 27 weight compartments and shelves for car cones and weight pliers
• Automatic braking of wheel after every measuring run
• Automatic measurement of static and dynamic unbalance in one measuring run
• Cycle time less than 18 s /22.5 x 10” wheel)
• Max. wheel weight 250 kg
• Truck wheel cone adaptor with wing nut, light-truck cone of 120–170 mm diameter and spacer
• Truck wheel cone adaptor with hidden spring so that only the cones for car wheels are required when car wheels are to be balanced